Instead of opting for the DX Engineering Current Choke DXE-FCC050-H05-A, I made my own. The Ferrite used is from Amidon part #FB-77-1024, they are fairly inexpensive and this setup can handle legal limit easy I put 6 on the LMR 400 type coax. By placing this near the feed point of the antenna you prevent unwanted RFI and feed line radiation. Easy enough, all it takes is a bit of heat shrink, the zip ties to hold the Ferrite’s in place and something to shrink the heat shrink with, try to avoid using an open flame, it will damage the heat shrink and you may not get 100% coverage.
https://www.amidoncorp.com/items/94
Popularity: 63% [?]
I have been a licensed Ham since 1981, some of my calls have been DB0ABB, Ka2qej, Kb6yll, N6swu. My Station consists of a FT 1000mp, FT920, Alpha 76a, and a full rack of audio gear for both rigs. I passed my 20 WPM. 
